RT200 IP PBX

IPPBX

RT200 IP PBX is an all-in-one converged communication system for small and mid-size offices. With built-in analog phone interfaces, CO lines interfaces, provides connectivities to not only POTS and analog extensions, but also IP based SIP trunks and SIP terminals as well. Using VoIP, it allows intercom calls from one office to another over internet or VPN, and it also allows to connect to ITSP via SIP trunking; With up to 120 SIP terminals licenses, RT200 supports remote extensions, allowing employees to communicate with customers and team members at home or on the road. RT200 offers rich features to meet current and future needs of enterprises

Description

Depending on configuration, RT200 VoIP PBX supports from 48 to 96 local analog extensions, up to 120 SIP terminals as remote extensions, and up to 96 analog ports to PSTN. With features such as click-to-call, auto-attendant, on a fly recording, mobile extension, and call back, it helps to reduce operation cost and improves the communication with customers.

Applications

- Telephon system for SMB

- Call center

- Telephone system for virtual offices

RT200 IPPBX provides many features to improve your customer caring, which can only be found in expansive PBX. It has configurable greetings and reminders for the business hours and close hours. The remote attendant function allows small office to provide 7x24 services without expensive cost. With RT200 you can provides quality services for less investment.

RT200 IP PBX has all the IP remote calling functions you need for home working, business traveling, and communication among branches through intranet. The international call or long distance calls are turned into local calls or toll free calls. With the advanced routing capabilities RT routes calls intelligently according to call types

Technical Specs

Attendant
Automated attendant
Interactive voice response (IVR)
Working hour and non-working hour service
Changing automated attendant profile on a fly
Queuing
Operator group (Up to 5 operators)
Operator console

Incoming call
Direct inward dialing (DID)
Direct dialing in (DDI)
Calling line identification (CLI)
Distribution
Call block
Ring tone pattern selection
Call waiting

Group receiving
Extension group
Group call distribution
Group ringing

Extension receiving
Call forking (Ring simultaneously another pre-selected terminal)
Call forwarding (FWD)
Do not disturb (DND)
Ring pattern selection
Color ring back tone

Call pickup
Directed pickup
Group pickup
Pickup operator’s call only

Making call
Intercom call
Account code entry

Outgoing line preference
Trunk group
Speed dialing
Hot line (Immediate, delay)
Caller ID block
Emergency call

Outside access
Direct inward system access (DISA)
Call back
Remote extension setting on phone

Call restriction
Toll restriction/Call barring
Budget management
Extension lock
Verified code entry

Routing
Automatic route selection

Call transfer
Blind call transfer
Consultation call transfer
Call transfer to CO line

Call hold
Call hold
Call park
Music on hold

Conference
3-way calling

Caller ID
Caller ID
Incoming call log

Message notification
Voicemail message waiting(FSK, polarity reversal)

Recording
Extension recording
On the fly recording

Audible tone
Dial tone
Confirmation tone
Stutter dial tone

CO line (FXO)
Polarity inverse detection
Caller ID detection
Busy tone detection
DTMF outpulsing delay
Volume control

Subscriber line (FXS)

Polarity inverse generation
Caller ID generation (FSK,
DTMF)
Ring cadence setting
Ring frequency setting
Volume control
Ring volt 60V RMS
Ring Frequency 20-25Hz

Other calls features
Music on hold
Color ring back tone

SIP trunk
Registration per line
Registration per system

Tie trunk service
Direct internal dialing
Call forwarding
Call transfer
Outbound trunk sharing

Other SIP connection
Peer-to-peer SIP communication

SIP extension
Outgoing
Incoming
HOLD
Transfer
Busy line field (BLF)

PC assistant
Click-to-call
Contact list
Presence
Short message
Retrieving voice mail and
recording file
Call log

Networking
DHCP
DNS/DDNS
PPPoE
NAT traversal
IP address filtering for security

Media stream processing
Codecs: G.711, G.729A,
Echo cancellation
Jitter buffer automatic
adjustment
Busy tone detection

Not-Telephone Terminal

Fax transmit and receive (T.30 and T.38)
POS transmit
PBX connectivity (Analog trunk
and analog extension)

System management
Web management interface
(Local and remote access)
Firmware upgrade
Log management
Configuration import and export
System status monitoring and
statistics

Pictures

IP PBX system

Models

Model name	Analog Extensions	CO lines	Ethernet ports	SIP users
RT200-88S/8	88	8	2	120
RT200-40S/8	49	8	2	120
RT200-64S/8	64	8	2	120
RT200-80S/16	80	16	2	120
RT200-56S/16	56	16	2	120
RT200-32S/16	32	16	2	120
RT200-24S/24	24	24	2	120
RT200-72S/24	72	24	2	120
RT200-48S/24	48	24	2	120
RT200-36S/36	36	36	2	120
RT200-16FXO	0	16	2	120
RT200-24FXO	0	24	2	120
RT200-32FXO	0	32	2	120
RT200-48FXO	0	48	2	120